• Cement-based, polymer-modified floor tile grout
• For floor tile joints from 3 mm up to 12 mm wide
• Hard-wearing joint filler for foot traffic
• Smooth, consistent finish that is easy to apply
• Grey
• 3 kg

First, make sure the floor tile adhesive has fully set and the joints are clean and free from spacers and debris.

Next, mix the powder with clean water to a smooth paste.

Then work it fully into the wide joints with a grout float, filling them completely, and strike off the excess across the tiles.

Finally, once firm, sponge the faces clean and polish off the haze. For narrow wall joints up to 3 mm choose our Wall Tile Grout, and for mould-prone wet areas choose Steri-Grout.

• Product code: BDFTG3
• Type: cement-based, polymer-modified floor tile grout
• Joint width: 3 mm to 12 mm
• Colour: grey
• Use: floor tile joints under foot traffic
• Size: 3 kg

What joint width is it for?

Floor tile joints from 3 mm up to 12 mm wide, which covers most floor tiling. For narrow wall joints up to 3 mm, use our Wall Tile Grout.

Is it hard-wearing enough for floors?

Yes, it is a cement-based, polymer-modified floor grout designed to take foot traffic.

What colour is it?

Grey. As a cement grout, the exact shade can vary slightly with mixing water and drying conditions.

Can I use it in a bathroom floor?

Yes for the floor joints. In mould-prone wet areas, Steri-Grout adds extra mould resistance.

Do I need to seal it?

A grout sealer helps keep cement grout clean and water repellent in heavy-use or wet areas, though it is not essential.

How much do I need?

Coverage depends on tile size and joint width; wider floor joints use more. A 3 kg bag suits a small floor, buy more for larger areas.